2MW-24MW 1310nm DFB butterfly laser diode produce laser beams with a stable wavelength.It can deliver high output power up to a maximum of 24MW.The module is composed of a built-in or external opto-isolator,14-pin butterfly package with thermo-electric cooler,single mode fiber butterfly,900μm tight tube,and FC/APC connector.The length of fiber butterfly is 1.00±0.10m.With a low threshold current,the device can be supplied with a built-in or external modem.
其它产品
DFB Butterfly Laser Diode
Description
Applications
◆ CATV forward-path
◆ 1310nm broadcast and point-to-point applications
Absolute Maximum Ratings
| Parameter | Symbol | Condition | Min. | Max. | Unit |
| Operating Case Temperature | Tc | I=Iop | -20 | 80 | °C |
| Storage Temperature | Tstg | - | -40 | 85 | °C |
| Laser Forward Current | If | - | - | 150 | mA |
| Laser Reverse Bias | Vr | - | - | 2 | V |
| Photodiode Reverse Bias | Vrpd | - | - | 10 | V |
| TEC Current | Itec | -20 °C < Tc < +65 °C, Top=25 °C If=100 mA | -2 | +2 | A |
| TEC Voltage | Vc | -2.5 | +2.5 | V | |
| ESD | - | ESD-HBM:R=1500 ohm, C=100 pF | -500 | +500 | V |
| Lead Solder Temperature | - | - | - | 260 | °C |
| Lead Soldering Time | - | - | - | 10 | s |
| Fiber Bend Radius | - | - | 30 | - | mm |
| Fiber Yield Strength | - | - | - | 1 | kgf |
Optical & Electrical Characteristics
| Parameter | Symbol | Test Conditions | Min. | Typ. | Max. | Unit |
| Center Wavelength | λc | CW | 1300 | 1310 | 1320 | nm |
| Spectral Width (-3 dB) | Δλ | CW | - | 0.5 | 1 | nm |
| Optical Output Power | Po | CW, TL=25 °C | - | - | 32 | mW |
| Optical Isolation | IS | T=25 °C | 30 | 35 | - | dB |
| Side-mode Suppression Ratio | SMSR | CW | 35 | - | - | dB |
| Threshold Current | Ith | TL=25 °C | - | 10 | 15 | mA |
| Operating Current | Iop | CW | - | - | 100 | mA |
| Forward Voltage | VF | CW | - | 1.2 | 2.0 | V |
| Monitor Current | Imon | Vrpd=5 V | 100 | - | 1500 | μA |
| Monitor Dark Current | ID | Vrpd=5 V | - | - | 100 | nA |
| Operating Temperature | T | - | -20 | - | 60 | °C |
| Tracking Error | γ | TE=10log(Po(Tc)/Po(25°C) | -1 | - | 1 | dB |
| Thermistor Resistance | Rt | T=25 °C | 9.5 | - | 10.5 | KΩ |
| Thermistor B Constant | B | T=25 °C | 3900 | K | ||
| TEC Current | IC | ΔΤ=40°C | - | - | 1.0 | A |
| TEC Voltage | VC | ΔΤ=40°C | - | - | 2.0 | V |
| Frequency Range | F | - | 45 | - | 2500 | MHz |
| Cut-off Frequency | Fc(-3dB) | If=Iop | 4 | - | - | GHz |
| RIN | Nr | CW, If=Iop, f=2.5GHz | - | -155 | -150 | dB/Hz |
| Carrier Noise Ratio | CNR | Note 1 | 51 | - | - | dB |
| Composite Second Order | CSO | - | - | -57 | dBc | |
| Composite Triple Beat | CTB | - | - | -65 | dBc |
Pin Description
| 1 | Thermistor | 8 | Ground |
| 2 | Thermistor | 9 | Ground |
| 3 | LD (N) bias | 10 | Ground |
| 4 | Detector (P) | 11 | LD (P), ground |
| 5 | Detector (N) | 12 | LD (N), RF modulation |
| 6 | TEC (+) | 13 | LD (P), ground |
| 7 | TEC (-) | 14 | Ground |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1/2/4/8 Gb/s 850nm VCSEL - LC TOSA
The FT-E7192-xxx uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 1/2/4/8 Gbps data communication over multimode optical fiber for the ANSI X2.T11 Fibre Channel protocols. The optical assembly is designed to interface either 50μm or 62.5μm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
10 Gb/s 1310nm DFB Laser Diode - LC TOSA
The DFB-1310-10LR-LCA is specifically designed for applications based on several optical communications standards, including IEEE 10GBASE-LR, STM64, STM64 FEC, 10GFC, 10G GbE, 10G GbE FEC and 10GFC FEC. Excellent optical performance is achieved by matching the electrical characteristics of the TOSA and laser to the external circuitry. The TOSA is designed to be paired with the 10G LR ROSA PIN-1310-LR-x.
CW Tunable Laser - Butterfly Package
The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.
Receptacle Isolator
Receptacle Isolators are generally used in various TOSAs that require isolation to prevent feedback into lasers. F-tone Networks's Receptacle Isolators offer excellent performance with low insertion loss and high isolation. F-tone Networks's proprietary bonding process, combined with years of volume manufacturing experience, results in a high reliability record. Bare isolator chips survive more than 5,000 hours of damp heat testing without delamination.
Free Space Isolator
F-tone Networks's Free Space Isolators are used in various TOSAs, which require isolation to prevent feedback into the laser. This product is available in single and double stage designs. The Free Space Isolators offer excellent performance with low insertion loss and high isolation. F-tone Networks’s proprietary bonding process, combined with years of volume manufacturing experience, results in a high reliability record. Bare isolator chips survive more than 5,000 hours of damp heat testing without delamination.
ASE 光源
ASE 光源
台式 ASE（放大自觉辐射）光源是专为生产和实验室实验设计的。光源主体部分是增益介质掺铒或掺镱光纤和高性能的泵浦激光器。专业而无邪的光路设计可以知足种种领域的实验、测试需求。奇异的 ATC和APC电路通过控制泵浦激光器的输出包管了输出功率的稳固。通过调理APC,可在一定规模内调理输出功率。轻盈和智能的操作与远程控制。