标准光 ？
SFP+ Twinax Cable
Specifications
- 产品型号: 10GSFP-CABLE-XX
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: Up to 10.5G
- 传输距离: 0.5~15m
- 发射波长: copper cable
- 吸收波长: copper cable
- 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 吸收迅速度: 0.5~15m
- 吸收迅速度: 0.5~15m
Description
SFP+ Twinax Cable
F-tone SFP+ direct attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. The design allows for serial data transmission up to 10Gbps in each direction. Low power consumption helps make the SFP+ copper cable assembly an economical solution for within rack or rack-to-rack applications.
Features:
- Supports serial data rates up to 10Gbps
- Low cost
- Low power consumption
- Enhanced EMI suppression
- Pull-to-release retractable pin latch design
Application:
- Switches
- Networking - servers, routers and hubs
- Enterprise storage
- Telecommunications Equipment
- Network interface cards
Ordering information:
| Part No. | Data rate | Length | AWG | Passive/Active | Temp |
| 10GSFP-CLB-H-30P | Up to 10.5G | 0.5m | 30 | Passive | 0-70C |
| 10GSFP-CLB-01-30P | Up to 10.5G | 1m | 30 | Passive | 0-70C |
| 10GSFP-CLB-02-30P | Up to 10.5G | 2m | 30 | Passive | 0-70C |
| 10GSFP-CLB-03-30P | Up to 10.5G | 3m | 30 | Passive | 0-70C |
| 10GSFP-CLB-04-30P | Up to 10.5G | 4m | 30 | Passive | 0-70C |
| 10GSFP-CLB-05-30P | Up to 10.5G | 5m | 30 | Passive | 0-70C |
| 10GSFP-CLB-H-24P | Up to 10.5G | 0.5m | 24 | Passive | 0-70C |
| 10GSFP-CLB-01-24P | Up to 10.5G | 1m | 24 | Passive | 0-70C |
| 10GSFP-CLB-02-24P | Up to 10.5G | 2m | 24 | Passive | 0-70C |
| 10GSFP-CLB-03-24P | Up to 10.5G | 3m | 24 | Passive | 0-70C |
| 10GSFP-CLB-04-24P | Up to 10.5G | 4m | 24 | Passive | 0-70C |
| 10GSFP-CLB-05-24P | Up to 10.5G | 5m | 24 | Passive | 0-70C |
| 10GSFP-CLB-06-24P | Up to 10.5G | 6m | 24 | Passive | 0-70C |
| 10GSFP-CLB-07-24P | Up to 10.5G | 7m | 24 | Passive | 0-70C |
| 10GSFP-CLB-08-24P | Up to 10.5G | 8m | 24 | Passive | 0-70C |
| 10GSFP-CLB-09-24P | Up to 10.5G | 9m | 24 | Passive | 0-70C |
| 10GSFP-CLB-10-24P | Up to 10.5G | 10m | 24 | Passive | 0-70C |
| 10GSFP-CLB-11-24P | Up to 10.5G | 11m | 24 | Passive | 0-70C |
| 10GSFP-CLB-12-24P | Up to 10.5G | 12m | 24 | Passive | 0-70C |
| 10GSFP-CLB-05-30 | Up to 10.5G | 5m | 30 | Active | 0-70C |
| 10GSFP-CLB-07-30 | Up to 10.5G | 7m | 30 | Active | 0-70C |
| 10GSFP-CLB-10-28 | Up to 10.5G | 10m | 28 | Active | 0-70C |
| 10GSFP-CLB-12-28 | Up to 10.5G | 12m | 28 | Active | 0-70C |
| 10GSFP-CLB-15-24 | Up to 10.5G | 15m | 24 | Active | 0-70C |
SFP+ Direct Attach , also known as Direct Attach (DA), 10GSFP+Cu, 10GBASE-CR, 10GBASE-CX1, SFP+, or 10GbE Cu SFP cables. Direct Attach uses a passive twin-ax cable assembly and connects directly into an SFP+ housing. SFP+ Direct Attach has a fixed-length cable, typically 1 to 7 m (passive cables) or up to 15 m (active cables) in length and, like 10GBASE-CX4, is low-power, low-cost and low-latency with the added advantages of using less bulky cables and of having the small form
factor of SFP+. SFP+ Direct Attach today is tremendously popular, with more ports installed than 10GBASE-SR. SFP+ Direct Attach will be replaced by AOC cables due to better performance and reducing price gap if compare with copper cables.
Advantages of DAC cable:
- DAC cables are a cost effective, proven solution for interconnecting networking applications
- Use the same port as an optical transceiver, but with significant cost savings and power savings in short reach applications
- The products are continuing to evolve to meet industry needs of higher data rates
- and densities with low power consumption
- Ethernet, Fibre Channel, and InfiniBand standards are increasing in speed to support this increase
Related Products
50GHz DWDM SFP+
- SFP+ Single-Mode for DWDM Application
- Duplex SFP+ Transceiver
- Digital Diagnostic Function
- RoHS6 Compliant
- Available in all C-Band Wavelengths on the 50GHz
- DWDM ITU Grid
- Temperature-Stabilized DWDM EML Transmitter
- Duplex LC Connector
- Power Dissipation ＜1.5W
- Dispersion tolerance from -300ps/nm to 800ps/nm
- Hot-Pluggable SFP+ Footprint
- Compliant with SFF-8431 MSA
- Compliant with SFF-8432 MSA
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Tunable DWDM SFP+ Transceiver
F-tone tunable SFP+ transceiver is fully compliant to SFP+ MSA. It supports 50GHz DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA and SFF 8472 MSA.
SDH SONET SFP+ transceiver
Compliant with Small Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel transceiver for FC-PI-5 and FC-PI-2 gigabit applications.
CWDM 10G SFP+ Transceiver
F-tone CWDM SFP+ transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength.
BIDI SFP+ transceiver
F-tone BIDI SFP+ transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
10G SFP+ Transceiver
F-tone SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet.